Product category:
Reference standards
News Release from: LGC | Subject: ERM DA345a, ERM DA346a
Edited by the Laboratorytalk Editorial
Team on 10 March 2008
New reference materials for testosterone
research
LGC introduces frozen human serum certified for testosterone measurement to ensure the highest levels of traceability and accuracy
LGC, in its capacity as the UK's designated National Measurement Institute for chemical and biochemical measurements, has worked closely with the University Hospital of Wales (UHW) to produce two new higher order certified reference materials (CRMs) for testosterone in frozen human serum These materials are intended for method validation and for monitoring the performance of methods commonly used in medical laboratories
This article was originally published on Laboratorytalk on 10 Jun 2002 at 8.00am (UK)
Related stories
New FTMS for LGC
LGC selects £500k Bruker Daltonics Fourier transform instrument to expand its mass spectrometry capability for chemical and bio-molecules
Catalogue of abuse
Reference materials for clinical, forensic and toxicological analysis updated to include new matrix materials including drugs of abuse in saliva
The new materials meet the stringent technical guidelines of the European Reference Materials (ERM) status.
The determination of testosterone in human serum is carried out in medical laboratories to assess a range of conditions.
For example, testosterone is measured in males to evaluate impotence or infertility, and in females to help evaluate male body characteristics and irregular menstrual periods.
Further reading
USP Standards 100 course comes to Europe
Seminars for pharmaceutical industry professionals in the use of USP-NF (United States Pharmacopoeia and National Formulary) standards in Runcorn, UK, and Luckenwalde, Germany
Practical training for measurement in the lab
Valid Analytical Measurement programme publishes new guides on CD-Rom designed to make achieving best laboratory practice easy for inexperienced staff
Testosterone measurements are also used to check for abnormal levels in sportsmen and sportswomen.
To be confident in the quality of the results of analysis of such samples, it is important to validate and monitor procedures using CRMs close in matrix and composition to the test samples.
The materials were prepared from a single native female human serum pool.
Half of the serum pool was used to produce a material with a level of testosterone within the normal female range; testosterone in methanol was added to the other half to produce a material with a level of testosterone within the normal male range.
They were sterile filtered, and aliquots of 0.8ml minimum were sub-sampled into plastic screw-cap 3ml vials.
The matrix of these materials is novel - until now only lyophilised serum materials certified for testosterone have been available.
The development of the materials was carried out under the National Measurement System's ChemBio programme.
The materials were certified by LGC using isotope dilution mass spectrometry and the data were corroborated by measurements carried out by UHW, by data from the Wales External Quality Assessment Scheme (Weqas) and by the National Institute of Standards and Technology (Nist) in the USA.
The data were accepted as complying with the principles laid down in the technical guidelines of the ERM co-operation agreement between LGC, BAM and IRMM.
The materials have also been accepted for inclusion by the Joint Committee for Traceability in Laboratory Medicine (JCTLM) on its database of higher order reference materials.
This is a database of reference materials that have been reviewed for their compliance with the European Union's IVD Directive (IVDD) requirement for higher order materials.
The new materials from LGC Standards will enable laboratories to comply with the IVDD's regulatory requirements to use higher order reference materials.
These materials are available for sale from LGC Standards as ERM DA345a (normal male level) and ERM DA346a (normal female level).
• LGC: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
