Product category:
Lab automation equipment and robotics
News Release from: Velocity11 | Subject: Automated cell viability workstation
Edited by the Laboratorytalk Editorial
Team on 07 November 2007
Cell viability analysis made more
reliable
Velocity11 has released a new application brief describing an automated cell viability workstation based on its Bravo liquid handler, BenchCel plate handling system, and CellTiter-Glo kit from Promega
The automated cell viability workstation is shown to provide a reliable, efficient solution for analysing cell viability, says Velocity11 Using the described protocol up to 65 plates can be run without user intervention
This article was originally published on Laboratorytalk on 11 Jul 2008 at 8.00am (UK)
Related stories
Reference guide covers optimal microplate sealing
The free-of-charge reference guide will be of interest to both those currently sealing microplates or those thinking about investing in a microplate sealing instrument
Discovery stimulated by automated compound library
Echnical poster describes a high throughput plate and tube sample processing system installed by Velocity11 at the Eskitis Institute for Cell and Molecular Therapies, Griffith University, Australia
The typical throughput for the described set-up was found to be about three hours for 50 plates, depending on exact protocol and liquid handling steps.
Cell viability testing is an important part of the Adme-Tox compound profiling approach.
The demand for these type of assays is high due to the increasing output from high throughput screening (HTS) and the pressure to front-load as much toxicity testing as possible during the drug discovery process.
There are a number of different approaches for cell viability testing.
In this new application brief the authors outline the protocol using the Promega CellTiter-Glo kit as it is ideally suited for adaptation on automated workstations.
The combination of Velocity11's Bravo liquid handler and the BenchCel plate handling system is shown to allow users to run the assay with high throughput and maximum walk-away time.
Plates are delivered to the Bravo, reagent is added and plates are placed on shaking devices.
The reagent is added without tip touching, therefore only one tip-box is needed for the total run.
The plates are transported back to the BenchCel for room temperature incubation, directly followed by signal detection on a microplate reader.
The automated workstation ensures that all process and incubation times are accurately managed, to ensure reliable and repeatable results.
• Velocity11: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
