Product category:
Dataloggers
News Release from: Yokogawa UK | Subject: Yokogawa Daqstation paperless recorder
Edited by the Laboratorytalk Editorial
Team on 24 August 2007
Independent autoclave monitor saves
paper
The Network Solutions Division of Yokogawa UK has collaborated with steriliser manufacturer BMM Weston to develop an independent monitoring system for the autoclaves used for sterilisation
The system is based on the Yokogawa Daqstation range of paperless recorders Autoclaves implement the sterilisation process by exposing the objects to be sterilised to pulses of high-temperature steam at high pressure
This article was originally published on Laboratorytalk on 20 Mar 2001 at 8.00am (UK)
Related stories
pH/conductivity analysers have integral mounting
Yokogawa's new Exaxt 150 Series of pH and conductivity analysers dramatically cut installation and set-up time using an innovative integral mounting system and simple termination.
Paperless recorder with circular display
Yokogawa has introduced a new version of its DaqStation DX200 paperless recorder featuring a circular display to emulate a traditional chart recorder
Traditionally, these instruments have been run by programmable logic controllers (PLCs) or bespoke microprocessor systems.
They typically incorporate a printer to print out information about the temperature and pressure from each sterilisation process, including 'pass/fail' information confirming that the unit has reached the required temperature for the specified time.
Paperless or chart recorders are often a requirement to provide independent monitoring of each run from separate sensors to prove that what the steriliser reports actually happened.
Further reading
Foundation Fieldbus compatible recorders
Yokogawa says its Daqstation paperless recorders are the first to support Foundation Fieldbus communication standards as well as talking to analogue devices
pH sensors solve boiler feed-water problems
Sensors supplied by Yokogawa UK have helped BP to solve the problem of providing accurate pH measurements on boiler feed water at the company's Hull plant
Paperless recorder meets 21CFR Part 11
A range of paperless recorders specifically designed to meet the electronic record and signature requirements the regulation, covering the storage of data in the pharmaceutical industry
Currently, many autoclave users have to manually check the independent monitor results, which can be time-consuming.
The system developed by BMM Weston and Yokogawa automates the process and produces results which are fully compliant with the various standards including 21CFR11 for the pharmaceutical industry and the European EN554/EN285: Appendix D.
With the new system, the PLC or microcontroller in the autoclave sends information on the time, number of pulses, sterilisation temperature and pressure to the recorder via industry standard communications interfaces.
The recorder automatically counts the number of pulses during three sets of pressure pulses according to the pre-programmed micro recipe, and checks that the temperature is within the specification for a given time period.
The recorder also checks, via steam tables, that the temperature is within the specification, calculated from the steam pressure.
The autoclave's controller then interrogates the Daqstation to detect 'pass/fail' results, and prints out the result of the independent monitoring system.
If the result is a 'pass', the user does not have to check the file: the results are simply stored.
For the new system, BMM Weston developed a link between the company's existing control software and the recorder, and specified the requirements for the equations used by the recorder to calculate the results.
BMM Weston and Yokogawa then worked closely together to implement the equations within the recorder.
The independent monitoring system makes maximum use of the mathematics functions incorporated in the Daqstation, which are enhanced by the extended length of the mathematics channels and the number of channels.
In particular, it detects low-to-high and high-to-low transitions of pressure pulses to count them in each stage of the cycle, as well as counting the time during which the temperature is within the sterilisation band.
The system also checks that the temperature derived from the steam tables value matches the actual temperature.
In addition to the time saving that results from the automation of a previously time consuming process, the new system has the major additional benefit of reducing the possibility of human error, ensuring greater accuracy and reliability of results in the long term.
• Yokogawa UK: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
