Product category:
Mechanical testing equipment
News Release from: Zwick Roell | Subject: Automated hardness testing
Edited by the Laboratorytalk Editorial
Team on 31 January 2005
Hardness measurement faster than ever
before
Hardness testing of metallic materials often places high demands on the patience of the user due to the standardised test methods defined within the various ISO and ASTM standards
In particular, the mandatory indentation dwell times are to be strictly observed while the time needed for equipment setup plays a significant role The result - a long test time
This article was originally published on Laboratorytalk on 17 Dec 2002 at 8.00am (UK)
Related stories
First digital solenoid tester
Digital machine specifically for testing solenoid actuators is designed to apply and measure force and electrical values simultaneously
Dual axial and torsion testing capability offered
Axial and torsion testing can be carried out in combination or separately on a new testing machine from the Zwick Roell Group.
Thus, automating such tests is a logical consequence.
Indentec and its parent company Zwick have come up with what they say is an outstanding solution: an automatic system which is fully compliant with international testing standards that is both fast and reliable.
The system comprises two hardness testing devices: a machine for testing according to the Rockwell method and an additional tester for Vickers hardness tests.
Further reading
Digital tension testing a success for Pirelli
A new robotic testing machine at the Pirelli Tyres plant in Carlisle has improved operational efficiency and freed technicians for more skilled work.
New generation of torsion testing
Machines can be used in the testing of plastics and metallic materials, fixture systems, joining elements, medical engineering products, wood and motor bearings
Hardness tester has generous working area
Test programmes are quick and easy to configure, being largely self-explanatory for both the test bench engineer and the user at the machine
Both machines are fully automated and designed for testing a range of components.
The specimens are fed into the testers using a six axis industrial robot.
The Vickers system has automatic focus and indentation measurement which eliminates any operator influence normally associated with such tests.
Additional workstations include a barcode reader, which recognises the relevant test to be performed by the label on each specimen and a thickness measuring station with two sensors for determining the specimen thickness.
The system is fully controlled using the Zwick testing software testXpert autoEdition.
Of particular mention is the fact that specimens can be tested in parallel as both hardness testing machines can be operated simultaneously.
If more than one test should be required per specimen, a shifting station will move the specimen the necessary distance.
Thanks to an intelligent test program, the system recognises which of the hardness testers is free and feeds the next specimen accordingly.
Two buffer magazines are provided to harmonise operations, ensuring that the next specimen is ready on time and adjusting discrepancies in times occurring between the Vickers and Rockwell testers.
The result - fast specimen throughput.
Furthermore, the tested specimens are sorted into containers in accordance with specific criteria, eg measured hardness value within/out of tolerance.
The system can conveniently be connected to a higher-level host computer for automatic upload of the relevant test results.
The quality requirements in manufacturing are growing steadily and, with them, the significance of production-geared testing.
In the automobile industry, in particular, dynamic testing is gaining in importance.
Zwick, a testing machine manufacturer based in Ulm, has included a number of servohydraulic testing machines in its offering which are geared especially for these applications.
Tailored to the environmental conditions particular to manufacturing and supporting the user through superior ease of operation, these machines enable a variety of stress tests to be performed over numerous cycles.
The key benefit is quality assurance in the running line.
Two examples of Zwick solutions deployed in the industry are presented in the following:.
Testing of rubber-metal bearings.
When rubber-metal bearings are tested in the line in volume production, a variety of characteristic values need to be determined to be able to assure the desired product properties and monitor the production process accordingly.
And it is with this measurement task in mind that Zwick developed a testing system allowing the determination of static and dynamic stiffness as well as the loss angle and loss factor of rubber-metal bearings.
As the testing machines are set up in the production environment, operator safety when inserting and removing the specimens but also during testing is of particular importance.
For this reason, the machine is equipped with a safety light curtain.
Together with an additional two-hand control used to start testing, the safeguard ensures optimal protection for the user.
The measured values are checked against specified tolerances with the results displayed using colored tolerance indicators.
And the testing machine comes with a convenient acoustic signal: a buzzer signals when it is necessary to change specimens or intervene in testing, freeing the operator to perform other activities in the meantime.
Dynamic torsion test bench for clutch tests.
To determine the fatigue rating and the force at break of clutches, Zwick developed a testing concept based on a servohydraulic torsion testing machine tailored to the particular requirements of the customer.
The basic task was to perform tests on the individual components of an automatic clutch.
The test bench was therefore equipped with a multi-functional fixture which the single disks were screwed onto.
As per the customer's wishes, the standard load frame from the servohydraulic product family was not used in this case.
Instead a special torsion testing frame was built to accommodate the torsion drive separately at the back of the machine.
The measurement and control electronics as well as all the hydraulic control components are compactly installed in the lower part of the base.
The testing area is sectioned off and equipped with an electric protection door to ensure operator safety. Request a free brochure from Zwick Roell ...
• Zwick Roell: contact details and other news
• Email this article to a colleague
• Register for the free Laboratorytalk email newsletter
• Laboratorytalk Home Page
Search the Pro-Talk network of sites
