Data logging through a local network
Jekyll Electronic Technology
Infinite iLog Lan
The Infinite iLog Lan carries a built-in ethernet/Lan adaptor and can be directly hooked on to a local network, to transmit its data and alarms via FTP or socket application commands
The new Infinite iLog Lan data acquisition system is now available from Jekyll Electronic Technology.
If the local network has a gateway to the Internet, or a GSM network router is connected, then the device can also transmit data and alarm emails.
The iLog is an 'active' telemetry device.
This means a schedule can be set to send and receive data using internet capabilities such as FTP and e-mail.
The iLog Lan can, therefore, be situated in any remote location.
All units carry a built-in TCP/IP webserver with live webpages that can be accessed by any internet browser application.
Users throughout the world can access, monitor and control the system via their internet browser.
The iLog Lan has four high-resolution analogue inputs that allow independent or simultaneous measurements to be recorded.
All four inputs have scale adjustment capability and alarm limits that can be preset.
Two of the analogue inputs can be configured as counter inputs and can support pulse output sensors.
The unit also features four digital inputs and two digital outputs that can be used either for monitoring alarm states or as independent, remote controlled outputs.
Up to 40,000 measurements can be recorded in the internal power failsafe memory.
This means that there is enough memory for companies to be able to keep readings recorded every 15 minutes for one year in accordance with HACCP compliance regulations.
The new Infinite iLog GSM stand-alone data acquisition system is now available from Jekyll Electronic Technology
Jekyll Electronic Technology says its Pulsar Telelog is a major innovation for companies wishing to add alarm status telemetry at remote facilities
Jekyll has now introduced the standard Electricity Industry Code of Practice 6 (CoP6) protocol onto its Pulsar Telelog remote metering logger, which is powered from the telephone line
The Lec data logger is capable of measuring up to 16,378 temperature readings over a -35 to 80°C range.
Grant Instruments has introduced its Yoyolog range of mini data loggers for measuring physical and electrical parameters.